Suntec Wellness Klimatronic OFFICE 2.8 KW SUPERSILENT A+ A++ ECO Operación Manual página 22

Description of the functions
Swing
•
Please press the swing button in order to activate or deactivate the automatic vertical movements of the
louvers.
Turbo function
•
This function is only available in cooling, dehumidification and fan mode.
•
If you activate this function, the selected mode is operated with maximum power.
•
Press the function button on the remote control "
10 times. If you press the function key again during this time, the turbo function is
activated.
Child lock (remote control only)
•
Please press the up and down buttons together for 3 seconds. This activates and deactivates the child
lock. When the child lock is activated, no other key can be activated. The child lock can be deactivated
by pressing the up and down buttons again for 3 seconds.
Sleep mode
•
Please set the desired room temperature in the cooling mode.
•
Please press the sleep mode button
•
The display will be dimmed and the unit will automatically operate with a low fan speed.
•
When in COOL mode, the selected temperature will increase by 1℃(1℉) per hour in a 2 hour period.
This new temperature will be maintained for the next 6 hours. Then the appliance turn it off.
•
When in HEAT mode, the selected temperature will decrease by 1℃(1℉) per hour in a 3 hour period.
This new temperature will be maintained for the next 5 hours. Then the appliance turn it off.
Draining the water tank
The unit is equipped with an automatic water evaporation system. Condensate is used for
the cooling of the condenser, which not only increases the cooling capacity, but also saves
energy.
•
As soon as the water tank is full, the indication of
and the standby mode will activate automatically.
•
Please switch off the unit and disconnect the power plug.
•
To empty the water tank, remove the water drain plug on the bottom of the unit and
allow the water to drain into a suitable container. Alternatively, you can drain the
water using the supplied drainage hose.
•
As soon as you restart the unit, it will function completely normally.
Maintenance
To avoid any injuries, please switch off the unit and disconnect the power plug before beginning the maintenance
or cleaning.
Cleaning
•
Please disconnect the power plug.
•
Please clean the unit with a moistened cloth and then wipe it off with a dry cloth. Please do not use
chemical solvents (such as petrol or alcohol). The surface as well as the entire housing could be damaged.
•
Please never clean the appliance with water.
Air filter
•
Please clean the air filter regularly. When the air filter has become blocked with dust, its efficiency will be
reduced.
•
Please wash the air filter by immersing it in warm water (approx. 40 °C) using a neutral cleaning agent,
rinse it under running water and subsequently dry it with a soft cloth.
•
Please do not operate the unit without an air filter.
", the turbo symbol "
on the remote control.
will appear on the display
" will flash
22