Tabla de contenido
Publicidad
1
Control panel
2
Carrying handle
3
Castors
4
Air outlet
5
Housing
Installation
The unit should be positioned on the floor, 45 cm away from other objects, as these can strongly affect the
capacity of the unit (Fig. 1).
Warning：Before using this unit, it should be positioned upright for at least 24 hours.
The unit can be moved without difficulty between rooms, however, please observe the following instructions:
Installation of the outlet hose, Fig. 2, 3 and 4
•
Please set up the unit in the vicinity of a wall socket.
•
Please secure the adapter to the ends of the outlet hose.
•
Please secure the angular end of the outlet hose to the corresponding opening on the back of the unit.
(Fig. 5)
•
Please attach the sliding bar to the window and insert the oval adapter in the opening on the sliding bar.
•
Please connect the power plug to the wall socket (220-240 V~, 50 Hz).
For casement windows, we recommend the Air-Block Klima-Sail EAN 4250058312099 (see chapter "Obtaining
spare parts and accessories")
Possible errors during the installation
•
Please pay attention that the air outlet is not blocked in order to avoid damaging the unit.
•
Do not kink the outlet hose (Fig. 4).
Control panel
1 Mode Timer
2 Fan Speed
3 DOWN (-)
4 Display
5 UP (+)
6 Mode
7 On/Off
6
Air inlet / filter grille
7
Outlet hose connection
8
Air inlet / filter grille
9
Power cable
10
Drainage hose connection
A
Timer indicator
B
Fan speed indicator
C
Mode indicator
D
UV light indicator
E
Sleep mode indicator
19
Publicidad
Tabla de contenido
