Tabla de contenido
Publicidad
1. ON/OFF: Please press the button to switch the unit on or off. When switched on, the unit automatically starts
with the previous settings.
2. MODE: After activation, please press the unit's mode button to select between cooling, heating,
dehumidification or fan mode.
3. FAN SPEED: After switching on the unit, press this button to set the fan speed (high, medium, low or automatic).
With automatic speed, the speed is adjusted to the ambient temperature.
4. UP/DOWN buttons (+ / -): Please set the unit to the cooling mode and adjust the desired room temperature
(18-32°C cooling or 13-27°C heating). with the use of these buttons. Please press both buttons simultaneously
for at least 3 seconds to switch the temperature display between Celsius and Fahrenheit.
5. TIMER: Please press this button and set the desired activation/deactivation time.
Description of the functions
Switching on / off
•
Please plug the unit into the mains socket. The unit starts in standby mode. Please press the On/Off
button to switch the unit on. The last used mode is automatically activated. Press the On/Off key again
to switch the unit off.
Cooling mode
•
Please press the mode button until the cooling mode indicator lights up.
•
Please press the UP/DOWN buttons to set the desired temperature (18-32 °C or 64-90 °F). The target
temperature is shown on the display.
•
Please press the fan button to set the speed of the fan (high, medium, low or automatic). The
corresponding speed indicator lights up.
Heating mode
•
Please press the mode button until the heating mode indicator lights up.
•
Please press the UP/DOWN buttons to set the desired temperature (13-27 °C or 55-81 °F). The target
temperature is shown on the display.
•
Please press the fan button to set the speed of the fan (high, medium, low or automatic). The
corresponding speed indicator lights up.
Fan mode
•
Please press the mode button until the fan mode indicator lights up.
•
Please press the fan button to set the speed of the fan (high, medium or low).
•
The corresponding speed indicator lights up, additionally, the set speed is indicated on the display using
the symbols
Dehumidification mode
•
Please press the mode button until the dehumidification mode indicator lights up.
•
The
symbol appears on the display
•
The fan speed is automatically set by the unit and cannot be adjusted.
Timer
•
Please switch the unit on and set the desired room temperature and fan speed. Please switch the unit
off now.
•
Please press the timer button to activate the function. The display indicates a flashing
an amount of hours.
•
Please set the desired switch-on time (0-24h) with the up/down keys on the remote control or press the
TIMER button on the unit directly.
•
Please wait 5 seconds until the timer function is activated, the corresponding indicator light will light up
and the unit will be switched to the standby mode.
•
Please press the timer button or the On/Off button once again to clear the timer setting. The indicator
light will switch off and the timer symbol will disappear from the display.
•
Please press the timer button in the activated state of the unit to set the deactivation time as described
above.
(for high speed),
(for medium speed) and
(for low speed).
symbol and
20
Publicidad
Tabla de contenido
