Maintenance - Hiyasu ASE 18UB Manual De Funcionamiento

06Manual 2Hiyasu Eng 7/4/06
Cleaning of unit casing
Cleaning of remote controller
Cleaning of air filter
*Los diferentes modelos tienen apariencias diversas
09:22 Página 73

MAINTENANCE

Cut off power supply
before cleaning unit casing with soft cloth.
In case of heavy stain, clean it with neutral detergent.
squeeze water in the cloth, wipe off the detergent on unit
Don't use water to wash unit casing, please use dry cloth.
Don't use glass cleaner or cloth soaked with chemicals.
1.Open inlet grille by pulling it upward.
3.Clean the filter Use a vacuum
cleaner to remove dust,or wash the
filter with water. After washing,
dry the filter completely in the shade.
5.Close the inlet grille.
2.Remove air filter
Push up the filter's center tab slightly
until it is caesura of the stopper. Remove
it by pulling down.
4.Attach the filter
Attach filter behind the stopper so that-
the "Front" indication is facing to the
front. Make surethat it is completely
behind the stopper, otherwiseproblems
might occur.problemas.
73