Use Rain Cover
see images
-
44
45
To assemble the rain cover, place it over the stroller, and then
attach the seaps and hook and loop fasteners on the rain cov-
er.
!
Before using the rain cover, please make sure the backrest
has been adjust ed to the lowest position and the infant child
restraint has been fastened.
!
Please use the different row of loop and hook fasteners on
the rain cover while using the unit in the travel system mode
and stroller alone.
!
When using the rain cover, please always check its
ventilation.
!
When not in use, please check that the rain cover has been
cleaned and dried before folding.
!
Do not fold the stroller after assembling the rain cover.
!
Do not place your child into the stroller assembled with rain
cover during hot weather.
Detach Soft Goods
see images
-
46
54
1. Follow steps
-
to detach soft goods.
46
54
!
Please keep the canopy wire well after removing it, and
must assemble the canopy wire while assembling the
canopy.
2. To re-attach the soft goods please repeat the above steps
in the reverse step.
25
45
Care and Maintenance
see images
55
!
Removable seat pad may be washed in cold water and drip-
dried. No bleach. Please refer to the care label for
instructions on cleaning the fabric parts of the stroller.
!
To clean stroller frame, use only household soap and warm
water. No bleach or detergent. Periodically wipe clean
plastic parts with a soft damp cloth. Always dry the metal
parts to prevent the formation of rust if the stroller has
come into contact with water.
!
From time to time, check your stroller for loose screws, worn
parts,torn material or stitching. Replace or repair the parts
as needed.
!
Excessive exposure to sun or heat could cause fading or
warping of parts.
!
If stroller becomes wet, open hood and allow to dry
thoroughly before storing.
!
If wheels squeak, use a light oil (e.g., Silicon Spray, antirust
oil, or sewing machine oil). It is important to get the oil into
the axle and wheel assembly.
!
When using your stroller at the beach, completely clean your
stroller after use to remove sand and salt from mechanisms
and wheel assemblies.
55
26