Using the 320EX for Remote Control Shooting
During Wireless Flash Shooting
The 320EX can be used for remote control shooting with cameras
compatible with Remote Controller RC-1, RC-5, or RC-6. When
wireless flash shooting is enabled, remote control shooting is possible
while changing easily the position of the 320EX.
Example of using the flash for wireless flash shooting
Press the remote release button on the 320EX and position the
320EX within two seconds.
38
1
Set the camera to <R> (Remote
control shooting).
For the setting method, see the
explanations about the drive mode or
remote control shooting in the
camera's instruction manual.
Shade the eyepiece of the camera
viewfinder so that light does not enter.