Samsung SCC-C7455P Manual Del Usuario página 36

setup
2. Select the preset number.
3. Select <POSITION> and adjust <PAN/
TILT/ZOOM> to the desired setup using
the joystick.
4. Set <PRESET ID> to <ON> and enter the
name.

For entering the name, refer to "CAMERA ID".
(page 24)
5. Select <PRESET SPEED> and adjust the
pan/tilt speed of the preset.
6. Set the <DWELL TIME> that defi nes the
camera's hold duration and <IMAGE HOLD> of the preset.

If you set the <IMAGE HOLD> to <ON>, the video image will be held still until the
camera reaches the preset position.
7. Set <CAMERA SET> to <ON>.
You can adjust camera setups for each
preset.

For details on setting <IRIS>, <WHITE BAL>
and <FOCUS MODE>, refer to "CAMERA
SET". (pages 24 ~ 32)
M 
If VPS is set to ON in Camera Setup from
the main menu, the camera will operate in
VPS even if it's set to WDR in PRESET.

If you use WDR in PRESET, the camera will operate in WDR and release any previous
settings even if AGC has been set to FIX, SHUTTER to ON, SENSE UP to FIX in the
main menu.
36_ setup
PRESET
0 0 1 1 2 2
5 5 6 6 7 7
10 10 11 11 12 12
15 15 16 16 17 17
20 20 21 21 22 22
25 25 26 26 27 27
30 30 31 31
1/16 1/16
PRESET NO. 1 PRESET NO. 1
POSITION
PRESET ID PRESET ID
PRESET SPEED PRESET SPEED
DWELL TIME DWELL TIME
IMAGE HOLD IMAGE HOLD
CAMERA SET CAMERA SET
CAMERA SET CAMERA SET
IRIS
WHITE BAL WHITE BAL
FOCUS MODE FOCUS MODE
3 3 4 4
8 8 9 9
13 13 14 14
18 18 19 19
23 23 24 24
28 28 29 29
ON ON
[ [ 5 5 ] ]
3SEC 3SEC
OFF OFF
ON ON
ALC
MF MF