Connecting The Speaker Output Terminals; Using The Speaker Input - Pioneer GM-6300F Manual Del Propietário

Connecting the Speaker Output
Terminals
1. Expose the end of the speaker wires
using nippers or a cutter by about
10 mm and twist.
2. Attach lugs to speaker wire ends.
Lugs not supplied.
• Use pliers, etc., to crimp lugs to wires.

Using the Speaker Input

Connect the car stereo speaker output wires to the amplifier using the supplied speaker input
connector.
• Do not connect both the RCA input and the speaker input at the same time.
7 Connections when using the speaker input
Speaker input connector
To speaker input termi-
nal of this unit.
Twist
10 mm
Lug
Speaker wire
Green: CH B, Left +
Green/black: CH B, Left ≠
Violet/black: CH B, Right ≠
Violet: CH B, Right +
Gray: CH A, Right +
Gray/black: CH A, Right ≠
White/black: CH A, Left ≠
White: CH A, Left +
3. Connect the speaker wires to the
speaker output terminals.
• Fix the speaker wires securely with the termi-
nal screws.
Terminal screw
Speaker
output
terminal
Speaker wire
Speaker output
Car Stereo
8