Connecting The Speaker Terminals; Using The Speaker Input - Pioneer GM-7300M Manual Del Usuario

Connecting the Speaker Terminals

1. Expose the end of the speaker wires
using nippers or a cutter by about
10 mm and twist.
2. Attach lugs to speaker wire ends.
Lugs not supplied.
• Use pliers, etc., to crimp lugs to wires.
3. Connect the speaker wires to the
speaker terminals.
• Fix the speaker wires securely with the termi-
nal screws.
Terminal screw
Speaker
terminal
Twist
10 mm
Lug
Speaker wire
Speaker wire

Using the Speaker Input

Connect the car stereo speaker output
wires to the amplifier using the supplied
speaker input connector.
• Do not connect both the RCA input and the
speaker input at the same time.
7 Connections when using the speaker
input
Car Stereo
White/black:
Left ≠
White:
Left +
Speaker input connector
To speaker input terminal of
this unit.
Speaker output
Gray/black:
Right ≠
Gray:
Right +
8