Kit Assembly - Metra 99-8720B Instrucciones De Instalación

ISO DIN radio provision
1. Mount the pocket to the radio
brackets with the (4) #8 x 3/8"
Phillips screws supplied. (Figure A)
2. Slide the radio into radio brackets/
pocket assembly and secure with
screws supplied with the radio.
(Figure B)
3. Locate the factory wiring harness
and antenna plug in the dash.
Metra recommends using the
proper mating adapters from Metra
and/or AXXESS.
4. Mount the new radio assembly into
the dash and reassemble dash in
reverse order of disassembly using
the 99-8720B radio trim panel
instead of the factory trim panel.

Kit Assembly

(Figure A)
99-8720B
(Figure B)
3