Installation; Ambient Temperature; Before Placing Food In The Appliance; Power Failure - THOMSON THD 545 WH Manual De Instrucciones

The appliance must be grounded. The manufacturer is not responsible for damages that may occur as a
result of usage without grounding.
INSTALLATION
Install the appliance in a dry, well ventilated room. The installation location should neither be exposed to
direct sunlight nor near a heat source, e.g. a cooker, radiator, etc.
To ensure adequate ventilation for the appliance, allow a minimum of 10 cm of airspace on each side of
the cabinet.
For uneven surfaces, front feet can be aligned.
To install the door handles
1. Remove the hole covers from the side of the
doors.
2. Align the holes of the handles with the ones on the
sides of the door.
3. Insert the supplied screws into the holes and fully
tighten them.
4. Insert the supplied screw covers on the handles.
AMBIENT TEMPERATURE
This appliance is designed to operate in ambient temperature between 10°C and 43°C. If these
temperatures are exceeded, i.e. colder or warmer, the appliance will not operate correctly. If the ambient
temperatures are exceeded for long periods, the temperature in the freezer compartment will rise above
‐18°C and food spoilage may occur.
BEFORE PLACING FOOD IN THE APPLIANCE
• Remove all packaging.
• Allow the appliance to run empty for 2 – 3 hours so the compartments can cool to the appropriate
temperature.
• Clean the inside of the appliance with warm water and a little liquid detergent to remove
manufacturing and transportation dust.
POWER FAILURE
If there is a power failure, do not open the door. Frozen food should not be affected if the power failure
6