Section 2 Installation; General; Receipt Of Equipment; Recommended Storage Practice - Brooks Instrument SFP33 Manual De Instalación Y Funcionamiento

Instruction and Operation Manual
X-PR-SFP-eng
Part Number: 541B070AAG
September, 2016

2-1 General

2-2 Receipt of Equipment

2-3 Recommended Storage Practice

This section contains the procedures for the receipt and installation of the
instrument. Do not attempt to start the system until the instrument has
been permanently installed. It is extremely important that the start-up
procedures be followed in the exact sequence presented.
When the instrument is received, the outside packing case should be
checked for damage incurred during shipment. If the packing case is
damaged, the local carrier should be notified at once regarding his liability.
A report should be submitted to your nearest Product Service Department.
Brooks Instrument
407 W. Vine Street
P.O. Box 903
Hatfield, PA 19440 USA
Toll Free (888) 554 FLOW (3569)
Tel (215) 362 3700
Fax (215) 362 3745
E-mail: BrooksAm@BrooksInstrument.com
www.BrooksInstrument.com
Brooks Instrument
Neonstraat 3
6718 WX Ede, Netherlands
P.O. Box 428
6710 BK Ede, Netherlands
Tel +31 (0) 318 549 300
Fax +31 (0) 318 549 309
E-mail: BrooksEu@BrooksInstrument.com
Remove the envelope containing the packing list and the factory test and
calibration report. Save this document for future reference. Carefully
remove the equipment from the packing case and inspect for damage.
The device should arrive in a vacuum-sealed plastic bag. Confirm that the
information on the label on the shipping carton and the label on the
pressure transmitter agree.
If intermediate or long-term storage of equipment is required, it is
recommended that the equipment be stored in accordance with the
following conditions:
a. Within the original shipping container.
b. Stored in a sheltered area, preferably a warm, dry, heated warehouse.
c. Ambient temperature 21°C (70°F) nominal, 32°C (90°F) maximum,
45°F (7°C) minimum.
d. Relative humidity 45% nominal, 60% maximum, 25% minimum.

Section 2 Installation

Brooks
Brooks Instrument
1-4-4 Kitasuna Koto-Ku
Tokyo, 136-0073 Japan
Tel +81 (0) 3 5633 7100
Fax +81 (0) 3 5633 7101
Email: BrooksAs@BrooksInstrument.com
®
SFP
2-1