Return Shipment - Brooks Instrument SFP33 Manual De Instalación Y Funcionamiento

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 49
Section 2 Installation
®
Brooks
SFP

2-4 Return Shipment

2-2
SFP pressure products come in two versions. The WA version is intended
for measuring the pressure of ultrapure water and the CA version is
intended for measuring the pressure of high purity chemicals.
SFP pressure products do not have any internal components that can be
repaired or replaced at the factory. The WA version may be returned to the
factory, while the CA version cannot be returned to the factory for safety
reasons.
Any WA unit must be returned with a Returned Warranty Request. A copy
of the Return Warranty Request is enclosed with this manual. Information
describing the problem found with the device must be included with the
request.
Prior to returning any instrument to the factory, contact your nearest Brooks
location for a Return Materials Authorization Number (RMA#). This can be
obtained from one of the following locations:
Brooks Instrument
407 W. Vine Street
P.O. Box 903
Hatfield, PA 19440 USA
Toll Free (888) 554 FLOW (3569)
Tel (215) 362 3700
Fax (215) 362 3745
E-mail: BrooksAm@BrooksInstrument.com
www.BrooksInstrument.com
Brooks Instrument
Neonstraat 3
6718 WX Ede, Netherlands
P.O. Box 428
6710 BK Ede, Netherlands
Tel +31 (0) 318 549 300
Fax +31 (0) 318 549 309
E-mail: BrooksEu@BrooksInstrument.com
All flow instruments returned to Brooks requires completion of Form
RPR003-1, Brooks Instrument Decontamination Statement, along with a
Material Safety Data Sheet (MSDS) for the fluid(s) used in the instrument.
Failure to provide this information will delay processing by Brooks
personnel. Copies of these forms can be downloaded from the Brooks
website www.BrooksInstrument.com or are available from any Brooks
Instrument location listed above.
Instruction and Operation Manual
X-PR-SFP-eng
Part Number: 541B070AAG
September, 2016
Brooks Instrument
1-4-4 Kitasuna Koto-Ku
Tokyo, 136-0073 Japan
Tel +81 (0) 3 5633 7100
Fax +81 (0) 3 5633 7101
Email: BrooksAs@BrooksInstrument.com

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Sfp32

Tabla de contenido