Keypad - Hach TitraLab AT1000 Serie Manual Básico Del Usuario

Tidy the work area
Attach the tubes to the instrument with the clips on the electrovalve and the sensor holder. Refer to
the illustrated steps that follow.
User interface and navigation

Keypad

Figure 6 shows the keypad and gives the key functions.
Figure 6 Keypad
1 Power
2 Printer
3 Selection keys
Key
Power
Printer
Selection keys
(contextual)
Navigation keys
Home
Description
Sets the instrument power to on or off. Push the key for 2 seconds to set the power to off.
Sends data to an attached printer. The printer key only operates if a printer is connected
to the instrument.
Shows the measurement options, selection and confirmation options. Use this key to exit
the current menu display or open sub-menus. Available options show on the display
above each key.
Scrolls through menus and data, enter numbers and letters, enter checkbox settings and
set options for the syringe and the pump.
Goes to the main menu.
4 Navigation keys
5 Home
English 15