Ec Declaration Of Conformity; Noise/Vibration Information - Würth ASS 18-1 Manual Del Usuario

If the product should fail despite the care taken in manufacturing and
testing procedures, repair should be carried out by a Würth master-
Service.
In all correspondence and spare parts orders, please always include
the article number given on the type plate of the machine.
The current spare parts list for this power tool can be viewed in the
Guarantee
For this Würth power tool, we provide a guarantee in accordance
will be corrected by replacement or repair.
Damage caused by normal wear, overloading or improper handling is
excluded from the guarantee.
Claims can only be accepted if the power tool is sent undisassembled
customer service agent for Würth compressed-air and power tools.
Disposal
The product, accessories and packaging should be sorted for
environmental-friendly recycling.
Do not dispose of power tools into household waste!
Only for EC countries:
According to the European Guideline 2012/19/
EU for Waste Electrical and Electronic Equipment
and its implementation into national right, power
tools that are no longer usable must be collected
separately and disposed of in an environmentally
correct manner.

Noise/Vibration Information

Measured sound values determined according to EN 62841.
Typically the A-weighted noise levels of the product are: Sound
pressure level 96.0 dB(A); Sound power level 107.0 dB(A).
Uncertainty K=5 dB(A).
Wear hearing protection!
according to EN 62841:
Vibration emission value ah = 17.5 m/s
(Impact tightening)
The vibration emission level given in this information sheet has been
measured in accordance with a standardised test given in EN 62841
and may be used to compare one tool with another. It may be used
for a preliminary assessment of exposure.
The declared vibration emission level represents the main applications
total working period.
An estimation of the level of exposure to vibration should also take into
level over the total working period.
Identify additional safety measures to protect the operator from the
keep the hands warm, organise work patterns.
We declare under our sole responsibility that this product is
in conformity with the following standards or standardisation
documents:
EN 62841-1:2015,
EN 62841-2-2:2014,
EN 55014-1:2017,
EN 55014-2:2015,
EN IEC 63000:2018, in accordance with the Directives 2006/42/
EC, 2014/30/EU, 2011/65/EU.
Brand: Würth
3063260XXXX000001X–3063260XXXX999999X
Adolf Würth GmbH & Co. KG, Abt. PPT
Reinhold-Würth-Straße 12 – 17,
74653 Künzelsau, GERMANY
Alexander Kimmig
Director Power Tools and Systems
Authorized Signatory
Dr.-Ing. Siegfried Beichter
Head of Quality,
Authorized Signatory
Künzelsau: 19.11.2019
Subject to change without notice.
, uncertainty K=1.5 m/s .
2 2
EC-DECLARATION OF CONFORMITY
17