Temperature Measurement; Current Measurement - Chauvin Arnoux C.A 5233 Manual De Instrucciones

English
3.1.6

Temperature measurement

To measure the temperature, proceed as follows:
1. Set the switch to
2.
Press
°F) ;
Remark: the default is °C.
3. Connect the temperature probe adapter (item 1) to the
COM and "+" terminals, observing the polarity;
4. Connect the temperature probe (item 2) to the adapter,
observing the polarity;
Note: if the probe is disconnected or open-circuit, the display
unit indicates OL.
The thermocouple temperature indication is displayed on
screen.
3.1.7

Current measurement

1. Set the switch to
2. Select AC or DC by pressing
is in DC mode. According to your selection, the screen
displays DC or AC ;
3. Connect the black lead to the COM terminal and the red
lead to "10A" ;
4. Connect the multimeter in series in the circuit.
45 - 139
;
to select the temperature unit and scale (°C or
;
. As default, the device