Milwaukee MXF COS350 Manual Original página 15

have been swallowed or entered the body, seek immediate medical
attention.
SPECIFIED CONDITIONS OF USE
The cut-off machine is intended for cutting metal, stone and
ceramic materials.
Please refer to the instructions supplied by the accessory manufacturer.
Do not use this product in any other way as stated for normal use.
WHEEL SELECTION
Cutting surface Cutting disc type
Non-metallic materials Silicone carbide abrasive
cutting disc
Metallic materials Aluminum oxide abrasive
cutting disc
Masonry materials Diamond wheel with water supply or
silicone carbide abrasive
cutting disc
WATER CONNECTION
A water connection is available on the tool to cool the wheel and reduce the
formation of dust. The water connection should be used on all concrete
cutting applications.
For best results, allow the water to coat the entire cutting wheel before
operation.
ONE-KEY™
To learn more about the ONE-KEY functionality for this tool, please
reference the Quick Start guide included with this product or go to www.
milwaukeetool.com/one-key. To download the ONE-KEY app, visit the App
Store or Google Play from your smart device.
Also, when the product experiences ESD, the Bluetooth communication will
be disconnected. It needs to be reset manually to recover.
We considered the results to be within our minimum acceptable
performance level according to EN 55014-2:2015 / EN 301489-1 V2.1.1 /
EN 301489-17 V3.1.1.
ONE-KEY™ Indicator
Solid Blue Wireless mode is active and ready to be confi gured
via the ONE-KEY™ app.
Blinking Blue Tool is actively communicating with the ONE-KEY™
app.
Blinking Red Tool is in security lockout and can be unlocked by the
owner via the ONE-KEY™ app.
28 ENGLISH
BATTERIES
Battery packs which have not been used for some time should be
recharged before use.
Temperatures in excess of 50°C (122°F) reduce the performance of the
battery pack. Avoid extended exposure to heat or sunshine (risk of
overheating).
The contacts of chargers and battery packs must be kept clean.
For an optimum life-time, the battery packs have to be fully charged, after
used.
To obtain the longest possible battery life remove the battery pack from the
charger once it is fully charged.
For battery pack storage longer than 30 days:
Store the battery pack where the temperature is below 27°C and away from
moisture
Store the battery packs in a 30% - 50% charged condition
Every six months of storage, charge the pack as normal.
BATTERY PACK PROTECTION LI-ION BATTERY
The battery pack has overload protection that protects it from being
overloaded and helps to ensure long life.
Under extreme stress the battery electronics switch off the machine
automatically. To restart, switch the machine off and then on again. If the
machine does not start up again, the battery pack may have discharged
completely. In this case it must be recharged in the battery charger.
TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods Legislation
requirements.
Transportation of those batteries has to be done in accordance with local,
national and international provisions and regulations.
• The user can transport the batteries by road without further
requirements.
• Commercial transport of Lithium-Ion batteries by third parties is subject to
Dangerous Goods regulations. Transport preparation and transport are
exclusively to be carried out by appropriately trained persons and the
process has to be accompanied by corresponding experts.
When transporting batteries:
• Ensure that battery contact terminals are protected and insulated to
prevent short circuit.
• Ensure that battery pack is secured against movement within packaging.
• Do not transport batteries that are cracked or leak.
Check with forwarding company for further advice
MAINTENANCE
The ventilation slots of the machine must be kept clear at all times.
Use only Milwaukee accessories and spare parts. Should components
need to be replaced which have not been described, please contact one of
our Milwaukee service agents (see our list of guarantee/service addresses).
If needed, an exploded view of the tool can be ordered. Please state the
Article No. as well as the machine type printed on the label and order the
drawing at your local service agents or directly at: Techtronic Industries
GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany.
EC-DECLARATION OF CONFORMITY
We declare under our sole responsibility that the product described under
Technical Data fulfi lls all the relevant provisions of the directives 2011/65/
EU (RoHS), 2014/30/EU, 2006/42/EC, 2000/14/EC, 2014/53/EU and the
following harmonized standards have been used:
EN 60745-1:2009+A11:2010
EN 60745-2-22:2011+A11:2013
EN 55014-1:2017
EN 55014-2:2015
EN 62479:2010
EN 301 489-1 V2.1.1 (2017-02)
EN 301 489-17 V3.1.1 (2017-02)
EN 300 328V2.1.1 (2016-11)
EN IEC 63000:2018
Measured sound power level: 109 dB(A)
Guaranteed sound power level: 111 dB(A).
Uncertainty K = 1,5 dB(A)
Conformity assessment procedure according 2000/14/EC to Annex VI.
Notifi ed Body:
DEKRA Certifi cation B.V. (0344)
Meander 1051/P.O.Box 5185
6825 MS ARNHEIM/6802 ED ARNHEIM
Netherlands
Winnenden, 2019-10-28
Alexander Krug
Managing Director
Authorized to compile the technical fi le.
Techtronic Industries GmbH
Max-Eyth-Straße 10
71364 Winnenden
Germany
SYMBOLS
CAUTION! WARNING! DANGER!
Remove the battery pack before starting any work on the
machine.
Please read the instructions carefully before starting the
machine.
Always wear goggles when using the machine.
Wear ear protectors!
Wear a suitable dust protection mask.
Wear gloves!
Do not use force.
Only for cutting work.
The guaranteed sound power level shown on this label is
111 dB(A).
Do not swallow the coin cell battery!
Do not work on a ladder. Be sure to stand fi rmly.
Accessory - Not included in standard equipment, available as
an accessory.
Do not dispose of electric tools together with household
waste material.
Electric tools and electronic equipment that have reached the
end of their life must be collected separately and returned to
an environmentally compatible recycling facility.
Check with your local authority or retailer for recycling advice
and collection point.
Rotation direction
n
Rated speed
V
Volts
Direct current
European Conformity Mark
Ukraine Conformity Mark
EurAsian Conformity Mark
ENGLISH 29