Notes on MDs
Since an MD itself is housed in a cartridge, free
from accidental contact with your fingers and
dust, it can withstand a certain degree of the
rough handling. However, dirt or dust on the
surface of the cartridge or a warped cartridge
may cause a malfunction. Observe the
following for best results.
Never touch the surface of the MD itself by
deliberately opening the shutter on the
cartridge.
Do not expose the MD to direct sunlight or
heat sources such as hot air-ducts. Do not leave
it in a car parked in direct sunlight where there
can a considerable rise in temperature.
Make sure the MD is not left on the dashboard
or rear tray of a car. where the temperature can
also be excessive.
4
Notes on mounting labels
Be sure to mount labels on cartridges correctly,
as failing to do so may cause the MD to
become stuck in the changer.
•Mount the label in a suitable position.
•Remove old labels before putting new ones
on.
•Replace labels that are beginning to peel
away from the MD.
Cleaning
Wipe the surface of the MD cartridge from
time to time with a soft dry cloth.