Product Familiarisation - Silverline 123557 Manual De Instrucciones

123557
Protect yourself from vibration
• Hand-held power tools may produce vibration. Vibration can cause
disease. Gloves may help to maintain good blood circulation in the
fingers. Hand-held tools should not be used for long periods without a
break.
Maintain your power tool
• Ensure all ventilation holes are kept clear at all times, otherwise
overheating and fire may occur.
Always disconnect
• Before changing fittings or accessories, always disconnect the tool from
the power source.
Switch off before connecting
• Ensure the power tool is switched off before connecting to the power
source. If the power tool stops unexpectedly, turn the power switch to
OFF.
Do not abuse the power cord
• Be sure the cable / extension cable is in good condition. Always have
a damaged cable / extension cable replaced at an authorised service
centre before using. Never pull the cable to disconnect it from the power
socket. Never carry the tool by its cable. Keep the cable away from damp,
heat, oil, solvents, and sharp edges.
Do not leave the tool running unattended
• Always wait until the tool has completely stopped functioning and has
been unplugged before leaving it unattended.

Product Familiarisation

1 Chuck
2 Side Handle
3 Reverse Switch
4 On/Off Switch
5 Lock On Button
6 Speed Control Dial
Low Speed Mixing Drill
www.silverlinetools.com
5