ProMed 3020 Instrucciones De Empleo página 22

i
nforMation on tHe unit
DE
Before operating the unit for the first time, please check that all
US
contents have been delivered and that the line voltage is correct.
This is done by checking whether the line voltage required for
FR
the unit (you can find this information on the specification plate)
corresponds to the local power supply (operating voltage of 230 V ~
IT
connected to a correctly installed wall socket with a supply
voltage of 230 V ~; operating voltage of 115 V ~ connected to
ES
a correctly installed wall socket with a supply voltage of 115 V~.
NL
• The Promed 3020 unit, in combination with the grinding
RU
heads designed for this unit, is ideal for manicures and gentle
pedicures, and is also particularly suitable for use with nail
PL
techniques (nail design).
SE
FI
/
accessories
• The Promed 3020 unit uses a high performance motor.
• The grinding head holder is able to fixate all commercial
The electronic speed control is used to smoothly set the
speed of the grinding head. The unit can rotate clockwise or
anticlockwise.
grinding heads with standardized dental size shafts of 2.32
to 2.35 mm (0.091 - 0.093 inches). Please use only high-
quality grinding heads with a rounded shaft end and a
maximal shaft length of 36 mm to guarantee the longest life
possible for the grinding head holder! Always make sure that
the grinding head does not come in contact with other objects
when you lay the handpiece down. There is a risk of the shaft
becoming compressed and asymmetrical. Asymmetry in the
grinding head causes damage to the handpiece!