Dropping The Feed Dog; Raising And Lowering The Presser Foot - Janome HT2008LE Manual De Instrucciones

Dropping the Feed Dog

The feed dog can be lowered by the drop feed lever
for sewing on buttons, manual embroidery etc.
Push the drop feed lever to the right to lower the feed
dog.
Push the lever to the left to raise the feed dog; it will
return to the up position when starting the machine.
NOTE:
The feed dog should be in up position for normal
sewing. Turn the handwheel toward you to check if
the feed dog comes up after setting the lever in the
up position.
q Down position
w Up position
e Feed dog
r Handwheel

Raising and Lowering the Presser Foot

The presser foot lifter raises and lowers the presser
foot.
You can raise it about 0.6 cm (1/4") higher than the
normal up position for easy removal of the presser
foot, or to help you to place thick fabric under the foot.
q Lowered position
w Normal up position
e Highest position
q
w
r
w
e
14
e
e
w
q