Pattern Selection Mode - Janome HT2008LE Manual De Instrucciones

r Mode selection key
Press this button to enter one of the following modes.
z Pattern selection mode:
Press the Up or Down
number of the desired stitch appears on the LED
display.
x Stitch width adjusting mode:
Press the Up key to increase the stitch width or
Down key to decrease.
NOTE:
You can adjust the stitch width while the machine is
running.
c Stitch length adjusting mode:
Press the Up key to increase the stitch length or
Down key to decrease.
NOTE:
You can adjust the stitch length while the machine is
running.
key until the pattern
r
z
x
c
12