Tabla de contenido
Publicidad
Knit Stitch
Machine setting
q Pattern
w LED display
e Foot
This stitch is recommended for finishing the edge of
knit fabrics.
Sew along the fabric edge leaving an extra allowance.
After you finished sewing, trim allowance close to the
stitches.
Serging Stitch
Machine setting
q Pattern
w LED display
e Foot
C: Overedge foot
CAUTION:
Do not set the stitch width less than 5 when using
the overedge foot to prevent the needle from
hitting the wires on the foot.
This stitch is used for finishing the raw edges of
stretch fabrics that tend to unravel.
A: Zigzag foot
q
q
42
w
e
w
e
Publicidad
Tabla de contenido
