Publicidad
Idiomas disponibles
Idiomas disponibles
legible state. Damaged labels or stickers must be replaced immediately.
■
Specified setting values or ranges must be strictly observed.
6. Operator's responsibility
■
Always store operation manual in immediate vicinity to the device.
■
Only operate the device in technically flawless and reliable condition.
■
Make sure that safety equipment is always freely accessible and check it regularly.
■
Besides the industrial safety instructions in this operation manual, the general safety,
accident prevention and environmental protection regulations for the field of application
of this device have to be taken into consideration and complied with.
7. Intended use
Operational safety is guaranteed only when used as intended in accordance with the
specifications in the operating instructions. Besides the industrial safety instructions in this
operation manual, the general safety, accident prevention and environmental protection
regulations for the field of application of this device have to be taken into consideration and
complied with.
Use and maintenance have to be executed always in accordance with local state or federal
regulations.
■
Twin impact driver 1/2" is designed exclusively for unscrewing and fastening screw
connections.
■
The improper use of this FÖRCH-pneumatic tool or when using this device not in ac-
cordance with the safety instructions can cause serious injury or death.
■
Any use beyond and/or in deviation of the intended of the device is forbidden and con-
sidered to be inappropriate.
■
Claims of any kind against the manufacturer and/or his authorized representative result-
ing from improper use of the device are excluded.
■
The operator is liable for all damages resulting from improper use.
8. Short-term and long-term storage
The device must be stored under the following conditions:
■
Store the device in a dry and dust-free area.
■
Do not expose the tool to liquids and/or aggressive substances.
■
Do not store unit outdoors.
■
Keep device away from children.
9. Dangers emanating from the device
Before each use this FÖRCH-tool has to be examined for full functionality. In case the
functional capability cannot be guaranteed as a result of this examination or if damages
are found, the tool must not be used. If full operability is not given and the tool is still used,
there is a risk of significant physical, health or property damages.
■
Do not use devices when the On/Off switch is defective. Devices that can no longer be
switched on/off with their switch are dangerous and have to be repaired.
■
All service and repair work has to be carried out by qualified personnel. In order to en-
sure operational safety in the long run, only original spare parts must be used.
■
Protective and/or housing elements must not be removed.
Publicidad
