Technical Specifications; Power Data - WEG CFW100 Manual Del Usuario

Technical Specifications

8 TECHNICAL SPECIFICATIONS

8.1 POWER DATA

Power Supply:
Tolerance: -15 % to +10 %.
„
Frequency: 50/60 Hz (48 Hz to 62 Hz).
„
Phase imbalance: ≤ 3 % of the rated phase-to-phase input voltage.
„
Overvoltage according to Category III (EM 61010/UL 508C).
„
Transient voltages according to Category III.
„
Maximum of 10 connections per hour (1 every 6 minutes).
„
Typical efficiency: ≥ 97 %.
„
For further information about the technical specifications, refer to
SPECIFICATIONS on page
40 | CFW100
121.
APPENDIX B – TECHNICAL