Safety Warnings In The Product; Preliminary Recommendations - WEG CFW100 Manual Del Usuario

Safety Instructions

1.2 SAFETY WARNINGS IN THE PRODUCT

The following symbols are attached to the product, serving as safety notices:
High voltages are present.
Components sensitive to electrostatic discharge.
Do not touch them.
Mandatory connection to the protective ground (PE).
Connection of the shield to the ground.

1.3 PRELIMINARY RECOMMENDATIONS

DANGER!
Always disconnect the main power supply before touching any electrical
component associated to the inverter. Several components can remain charged
with high voltages or remain in movement (fans) even after the AC power is
disconnected or switched off.
Wait at least ten minutes after turning off the input power for the complete discharge
of the power capacitors.
Always connect the grounding point of the inverter to the protection earth (PE).
6 | CFW100