Considered Standards - WEG CFW100 Manual Del Usuario

Technical Specifications

8.2.1 Considered Standards

„
SAFETY UL 508C - Power conversion equipment.
„
STANDARDS UL 840 - Insulation coordination including clearances and creepage distances for electrical
equipment.
„ EN61800-5-1 - Safety requirements electrical, thermal and energy.
„
EN 50178 - Electronic equipment for use in power installations.
„
EN 60204-1 - Safety of machiner y. Electrical equipment of machines. Part 1: general
requirements.
Note: The final assembler of the machine is responsible for installing a safety stop device
and a supply disconnecting device.
„ EN 60146 (IEC 146) - Semiconductor converters.
„ EN 61800-2 - Adjustable speed electrical power drive systems - Part 2: General requirements
„
Rating specifications for low voltage adjustable frequency AC power drive systems.
MECHANICAL „ EN 60529 - Degrees of protection provided by enclosures (IP code).
„
STANDARDS UL 50 - Enclosures for electrical equipment.
42 | CFW100
Table 8.2: Considered standards