Control Type V V W (P202 = 5) - WEG CFW100 Manual Del Usuario

First Time Power-Up and Start-Up

5.2.3 Control Type V V W (P202 = 5)

Seq Display Indication/Action
1
„
Initialization mode.
„ Press key to enter the first level of the
parameterization mode.
3
„
Press key
"P202 – Type of Control" for P202 = 5 (V V W ).
Use key .
5
„
If necessary, change the content of
"P399 – Motor Rated Efficiency" according to
the nameplate.
„
Press key for the next parameter.
7
„
If necessary, change the content of
"P401 - Motor Rated Current".
„ Press key for the next parameter.
9
„ If necessary, change the content of
"P403 – Motor Rated Frequency".
„ Press key for the next parameter.
32 | CFW100
to change the content of
Seq Display Indication/Action
2
„
Press keys or
P202.
4
„
Press key to save the change of P202.
„ Use key to select parameter P399.
6
„
If necessary, change the content of
"P400 – Motor Rated Voltage".
„ Press key for the next parameter.
8
„
If necessary, change the content of
"P402 – Motor Rated Speed".
„ Press key for the next parameter.
10
„ If necessary, change the content of
"P404 – Motor Rated Power".
„ Press key for the next parameter.
to select parameter