TROLLING SPEED
NOTE:
The trolling speed of this model is adjusted
automatically by the ECM according to the
operating conditions of the watercraft. There-
fore, it is not necessary to adjust the trolling
speed.
1. Measure:
• Trolling speed
Out of specification → Refer to service
manual.
Trolling speed:
1,250–1,450 r/min
Checking steps: (Watercraft on water)
• Start the engine and warm it up for a few
minutes at 4,000–4,500 r/min to stabilize
the trolling speed.
• Measure the engine trolling speed.
– 13 –
E