WARNING
Do not put in the safety key or the battery pack until
you assemble all the parts.
7.1
UNPACK THE MACHINE
WARNING
Make sure that you correctly assemble the machine
before use.
WARNING
•
If the parts are damaged, do not use the machine.
•
If you do not have all the parts, do not operate the
machine.
•
If the parts are damaged or missing, speak to the
service center.
1. Open the package.
2. Read the documentation in the box.
3. Remove all the unassembled parts from the box.
4. Remove the machine from the box.
5. Discard the box and package in compliance with
local regulations.
7.2
UNFOLD THE LOWER HANDLE
5
11
1. Pull up on the handle holes (11) to release the lower
handles (5).
2. Fold the lower handle up until the handle pins (12)
lock into position.
NOTE
Make sure that the two handle pins are in the same
position.
English
7.3
INSTALL THE UPPER HANDLE
13
1. Remove the packing material from the cable.
2. Insert the upper handle (4) into the lower handle (5).
3. Put the bolts (13) through the holes and tighten with
the nuts (14), using a Philips head screwdriver (not
included).
Do not damage the cable while installing the upper
handle.
7.4
INSTALL THE GRASS CATCHER
12
1. Remove the mulch plug.
2. Open the rear discharge door (6) and hold it.
3. Hold the the grass catcher by its handle and engage
the hooks on the slots (15).
4. Close the rear discharge door.
9
4
14
13
5
WARNING
15
EN
6