Faqs - ClicBot KY002CK10 Manual Del Usuario

FAQs

How to turn on/off ClicBot?
Is it a must to connect ClicBot to the internet
while playing?
Long press the power button on the rear side of
Brain module for 3 seconds to turn on ClicBot. No, but it needs to connect to the internet to
check for update.
Press the power button on the rear side of Brain
module and then choose the shutdown option to
turn off ClicBot, or long press the power button Is it a must to control ClicBot Robot with
for 4 seconds to force a shutdown. ClicBot App?
No, it can be controlled manually with the screen
Diagnostics - Auto Shutdown
of Brain module.
To maintain the battery and motor performance,
ClicBot will be shut down automatically in the
The maximum distance of remote control with
following situation:
ClicBot App
1. It hasn't been operated over 20 minutes;
2. Battery power is lower than 10%.
It depends on how to connect the robot to ClickBot
App:
How long does ClicBot take a full charge and ·Via router, it is up to 10m which may be different
how long can it be used continuously ? due to the performance of router.
·Via hotspot, it is up to 5m.
It takes 2.5 hours at 5V/2A to have it fully charged,
and it can be used continuously up to 4 hours.
24
Can ClicBot's functions be updated ?
module
ClicBot modules can be upgraded online.
The camera for face detection & recognition is
Connect Brain module to Wi-Fi, click Home button
located in the upper-left triangle area of the
"—" and choose "Update" to check/download the
screen of Brain Module, and it can identify faces
update.
at a distance of 1 m.
Connect other modules to Brain module to auto
start the update, follow the update instruction on
the screen to upgrade modules.
module
The identification distance of gestures like The camera for motion detection is located in
shielding, waving and etc. the upper-left triangle are of the screen of Brain
Module, and it can detect the movement at a
The gesture sensor is located in the upper-left
distance between 1 and 5 m.
triangle area of the screen of Brain module.
Please keep your hand at a distance of 5-20 cm
when shielding and waving, etc.
Brain module is equipped with a 1.2-megapixel
The detection distance range of Brain module
camera which is capable for controlling the
robot from the first-person point of view, face
The gesture sensor is located in the upper-left
detection & recognition and motion detection.
triangle area of the screen of Brain Module, and
it can detect the obstacle at a distance between 5
and 20 cm in front of robots.
The face identification distance of Brain The rotation range of the screen of Brain
module
The rotation range of the screen is up to 24
degree in the horizontal direction which can be
set in ClicBot App. Please do not rotate the screen
by hand.
The motion detection distance of Brain How to assemble a ClicBot Robot?
ClicBot is installed with a smart assembling
guidance system. After choosing which robot is
to be assembled, there will be a step-by-step
instruction shown on the screen of Brain Module.
The indicator light will flash to indicate where
to be connected. The system will automatically
check whether all the modules have been
The role of the camera of Brain module
assembled correctly and show alert message
on the screen in case of any error while the
indicator light is fast flashing. And the system will
automatically adjust the angle of connection as
long as the two modules are correctly assembled.
FAQs
Diagnostics – why does the indicator light of a
module flash?
The indicator light is used for indicating the status
of a module, mainly including:
Solid light - Operation
Breathing – Readiness
Flashing – Waiting for being connected to a
module
Fast flashing – Connection error
Programming language applicable to ClicBot
Support Graphic programming and Python
programming.
Editable modules applicable to ClicBot
Support over 20 editable modules, including the
screen of Brain module, loudspeaker, the motor
of Joint module, the motor of Wheel module, and
the color of the strip lights of Skeleton module.
25