ClicBot KY002CK10 Manual Del Usuario página 7

Specification of Modules
Base Accessory - Mount
The Mount can be used to fix your ClicBot to a table with Mount Stickers.
Dimension 75.1*75.1*45.2 mm
Net Weight 61 g
Please use the Mount stickers provided by KEYi Tech to ensure the
product is fixed properly.
10
Reinforcement Accessory - Locker
The Locker is used to reinforce connections between two modules.
Dimension 47*36*14.4 mm
Net Weight 10g
It can be used for connecting modules when additional reinforcements
are required.
Step1 Step2 Step3
Connect Locker Rotate Locker. Rotate until
between modules. baseline is aligned
Specification of Modules
Fixation Accessory - Holder
The Holder can be used to connect a cellphone or sports camera to your
ClicBot. It uses a standard 1/4 screw.
Diameter 40*40*86.6 mm
Net Weight 55 g
Degrees of Universal joint on the bottom: 0°～180°
Freedom Horizontal knob of the main part:
-90°~90°
Connector bottom
11