Device Elements; Start Up; Operation - Kärcher IVC 60/30 Tact2 Manual Original

Device elements

1 Tension lever
2 Filter cover
3 Flat fold filter
4 Right unlocking of the placement me-
chanics
5 Power cord
6 Suction head lock
7 Intermediate ring
8 Steering roller of the dirt container
9 Stopper
10 Dirt receptacle
11 Left unlocking of the placement me-
chanics
12 Impeller
13 Suction support
14 Steering roller of the chassis with park-
ing brake
15 Floor nozzle holder
16 Chassis
17 Drain pan
18 Handle of the dirt container
19 Holder for suction pipe
20 Connection plug of the thermal probe
21 Handle of the suction head
22 "Ready for use" indicator lamp
23 Rotating knob
24 Suction head
25 Torque motor
26 Exhaust muffler
27 Push handle
28 Cable hook
29 Nameplate
30 Opening of the protective cover
31 Protective cover
32 Thermal probe
14
 Bring the appliance to working position
- secure it, if required, with parking
brakes.
 Insert the suction hose (not included)
into the suction hose connection.
 Check the fill level in the dirt container
prior to starting work and empty the
container if necessary.
 Ensure that the dirt container has been
inserted properly.
 Attach the desired accessoried (not in-
cluded).
Power connection
Caution
Check direction of rotation of the engine at
every socket change.
Note: With correct direction of rotation a
strong airflow can be felt out of the opening
of the exhaust muffler. Air is suctioned with
incorrect rotation direction.
Illustration
 Check the direction of rotation of the
motor. Exchange the poles on the appli-
ance plug if the rotation direction is
wrong.
Caution
Risk of damage! Do not cover the supply
and exhaust air openings on the suction
head.
Caution
The two flat fold filters must never be re-
moved during vacuuming.
EN
– 2

Start up

Operation