Chauvin Arnoux C.A 5233 Manual De Instrucciones página 47

English
Each press of
this length...
Change the nature of the measurement
AC or DC.
short
Select the continuity test
test
To display the temperature in degrees
Celsius (°C) or in degrees Fahrenheit (°F).
3.2.2 The key
This key is used to choose a measurement range manually.
The range defines the maximum measurement span of which
the device is capable.
Remark : the Auto-range mode is activated as default.
Each press of
this length...
short To change the measurement range
manually (span and resolution).
Long
To return to Auto-range mode.
(> 2 sec)
Remark 1 : the continuity test
are not Auto-range.
Remark 2 : the Capacitance Measurement mode
range only.
3.2.3 The key
This key is used to store and display, successively, the current,
maximum, and minimum TRMS values.
The , , , and
MAX/MIN mode.
The AUTO mode is deactivated.
47 - 138
...serves to
or diode
mode.
...serves to
and diode test modes
is Auto-
, keys are inactive in the