Cleaning Mode - Ecolab DM Modular 20 Instrucciones De Manejo

4.4.1.4 Beverage mode – Cleaning interval reached – 'Beer Cut'
Fig. 10: Beverage mode – Cleaning interval reached – 'Beer Cut'
1 Cleaning intervall reached.
2 Days to the 'Beer-Cut' .
3
Activates "Cleaning mode"
4
Activates "Rinsing mode"
If the cleaning interval has been reached and the 'Beer Cut' has also been set, the
remaining days Fig. 10, pos. 2, are also displayed. At the end of the countdown the "Alarm
– No cleaning"
4.4.2

Cleaning mode

By calling up the "Cleaning mode" function
on page 21, Fig. 8, pos. 3, the display message changes and cleaning can be started.
Fig. 11: Cleaning mode - schema 1
The "Cleaning mode" is activated by pressing [OK] key.
The "Cleaning mode" is cancelled by pressing the [ESC] key and the display is changing
to previous display.
Fig. 12: Cleaning mode - schema 2
The water valve is opened.
Ä Chapter 4.4.2 'Cleaning mode' on page 23.
Ä Chapter 4.4.3 'Rinsing mode' on page 26.
Ä Chapter 4.5.3 'Alarm - No Cleaning' on page 28 is activated.
Control / Visualisation
Ä Chapter 4.4.1 'Beverage mode'
23 Rev. 04-06.2018