Honda PCX150 2020 Manual Del Propietário página 247

Engine Oil Changing Engine Oil, Cleaning Strainer Screen
u
3.
Place your scooter on its centre stand on
a firm, level surface.
4.
Place a drain pan under the drain bolt
and oil plug.
5.
Remove the oil fill cap/dipstick, drain bolt
and sealing washer to drain the oil.
6.
Remove the oil plug, O-ring, spring and
oil strainer screen and let the remaining
oil drain out.
Discard the oil at an approved
u
recycling centre.
7.
Clean the oil strainer screen.
8.
Check that the oil strainer screen and
sealing rubber are in good condition.
9.
Replace the O-ring and apply a thin coat
of engine oil to the new O-ring before
installing it.
10.
Install the oil strainer screen, spring and
oil plug and tighten.
Torque: 20 N·m (2.0 kgf·m, 15 lbf·ft)
90
Sealing washer
Spring
Oil strainer screen
Drain bolt
Oil plug
O-ring