When the Idling Stop System Does Not Operate Properly
Idling Stop Indicator Does Not
Come On
When the Idling Stop indicator does not
come on, perform the followings.
If the Idling Stop switch is at IDLING:
Press the Idling Stop switch to IDLING STOP.
If the engine is cold:
Warm up the engine.
The Idling Stop system does not operate
when the engine is cold.
If you did not ride the scooter after engine
starts:
Ride the scooter at speeds of over 10 km/h
(6 mph). The Idling Stop system does not
operate until you ride once.
If PGM-FI malfunction indicator lamp (MIL)
lights:
When the PGM-FI malfunction indicator lamp
(MIL) lights, the Idling Stop system does not
operate for protection of the engine. See
your dealer.
If the battery voltage is low:
Ride the scooter awhile, then stop the engine
and then restart the engine with start button
referring to the starting procedure (
for standard engine starting. The Idling Stop
system may not operate if the battery voltage
is low.
If this occurs frequently, contact your dealer.
P. 54)
2
113