Unlock the Ignition Switch in an Emergency
Set up to ID number input mode
#
1.
Use the emergency key to open the seat.
P. 118
2
2.
Remove the battery cover.
3.
Pull out the EM mode connector.
4.
Remove the blue dummy coupler by
releasing the tab of the EM mode
connector while lifting the hook of the
blue dummy coupler.
5.
Check the ID number on the ID tag.
6.
Connect the EM mode coupler provided
in the tool kit to the EM mode connector.
P. 83
2
Blue dummy
coupler
Tab Hook
EM mode
coupler
EM mode
connector
ID number
Continued
119