Installing The Blue Filter; Acquiring An Image - Zeiss Primostar 1 Manual De Instrucciones

ZEISS
2. Set the viewing height by swivelling the eye-

5.4 Installing the Blue Filter

Procedure 1. Put the blue filter onto the luminous-field di-
Proceed in the reverse order for removal.

5.5 Acquiring an Image

Info
The microscope is supplied factory-adjusted
Prerequisite
ü
Procedure 1. Place the sample in the sample holder of the
Instruction Manual ZEISS Primostar 1 | en-US | Rev. 2 | 415501-7021-111
pieces a full 180° upwards or downwards.
aphragm.
The position of the eyepieces is set [
mechanical stage.
5 First Operating Steps | 5.4 Installing the Blue Filter
}
18].
19