Setting Up The Device Safely; Power Supply - Medion MD 43277 Manual De Instrucciones

3.1. Setting up the device safely

 If the device has been moved from a cold room to a warm
room, wait before connecting it to the power supply. The re-
sulting condensation may damage the device. The device can
be operated safely as soon as it has reached room tempera-
ture.
 Take care to ensure the following:
– Allow at least 10 cm clearance at the sides and top of the
device if it is placed in a rack or a similar enclosed space.
– Do not expose the device to direct sources of heat (e.g.
heaters).
– Do not leave the device in direct sunlight.
– Do not expose the device to extreme temperatures.
– Do not place the device close to magnetic fields (for exam-
ple, televisions or other loudspeakers).
– Do not place naked flames (for example, lit candles) near or
on the device.
– Do not place containers filled with liquid, such as vases, on
or near the device. Such containers may tip over and the
liquid may impair the electrical safety of the device.

3.2. Power supply

 The device must be close to the mains socket, which must al-
ways be easily accessible. Position the cables so that no one
can tread on them or trip over them.
 To disconnect the device from the power supply, remove the
plug from the mains socket. Always hold the plug firmly when
unplugging it. To prevent damage, never pull on the cable.
DE
EN
FR
IT
NL
ES
45