8.3. Switching the device on/off
8.3.1. Switching the device on
Press the
The time and date are visible on the display.
8.3.2. Switching the device off
Press and hold the
When the device is in standby mode during battery op-
eration, the device automatically switches to ener-
gy-saving mode after 30 seconds.
Press the
energy-saving mode to standby mode.
The time and date are visible on the display.
8.4. Setting the language
The language is set to "English" when the device is used
for the first time or after it has been reset to factory
conditions.
The device is switched on or in standby mode.
Press and hold the
The Setup <System> menu is shown on the display.
Press the
button.
The System <Uhrzeit> menu is shown on the display.
Press the
Press the
button.
Press the
Press the button to confirm the selection.
The language is now set.
54
button to switch on the device.
button to switch the device to standby mode.
button.
or
button several times to switch to the <Language> menu.
or
button several times to select the language.
button to switch the device from