Assembling - Optika Italy INSPECTION SYSTEMS Serie Manual De Instrucciones

8.

Assembling

1. Insert the drop prevention ring ① in the pillar and lock it with
the fixing knob ②. (Fig. 1)
2. Insert the focus system ③ in the pillar and lock it with fixing
knob ④. (Fig. 2)
3. Insert the microscope body in the hole of the focus system
and lock it with the fixing knob ⑤. (Fig. 3)
4. Align the pins ⑥ of the microscope body with the holes ⑦ on
the ringlight illuminator, then gently push the ringlight until it
clicks into its position. (Fig. 4)
①
③
⑤
⑥
⑦
Page 10
②
F ig. 1 F ig. 1
④
F ig. 2 F ig. 2
F F ig. 3 ig. 3
F ig. 4 F ig. 4