Statement 1030-Equipment Installation; Statement 1034-Backplane Voltage; Statement 1040-Product Disposal; Statement 1045-Short-Circuit Protection - Cisco NCS 500 Serie Manual Del Usuario

Regulatory Compliance and Safety Information—Cisco NCS 500 Series Routers
Statement 1030—Equipment Installation
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Statement 1034—Backplane Voltage
Warning Hazardous voltage or energy is present on the backplane when the system is operating. Use caution when servicing.
Statement 1040—Product Disposal
Ultimate disposal of this product should be handled according to all national laws and regulations.
Warning
Statement 1045—Short-Circuit Protection
This product requires short-circuit (overcurrent) protection to be provided as part of the building installation. Install
Warning
only in accordance with national and local wiring regulations.
Statement 1046—Installing or Replacing the Unit
When installing or replacing the unit, the ground connection must always be made first and disconnected last.
Warning
Statement 1047—Overheating Prevention
Warning To prevent the system from overheating, do not operate it in an area that exceeds the maximum recommended
ambient temperature of : 32 to 104°F (0 to 40°C)
All manuals and user guides at all-guides.com
Regulatory Compliance and Safety Information—Cisco NCS 500 Series Routers
9