Statement 1025-Use Copper Conductors Only; Statement 1028-More Than One Power Supply; Statement 1030-Equipment Installation; Statement 1032-Lifting The Chassis - Cisco ASR 920 Serie Manual Del Usuario

Regulatory Compliance and Safety Information—Cisco ASR 920 Series Aggregation Services Routers
Statement 1025—Use Copper Conductors Only
Warning Use copper conductors only.
Statement 1028—More Than One Power Supply
Warning This unit might have more than one power supply connection. All connections must be removed to de-energize
the unit.
Statement 1030—Equipment Installation
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Warning
Statement 1032—Lifting the Chassis
To prevent personal injury or damage to the chassis, never attempt to lift or tilt the chassis using the handles on
Warning
modules (such as power supplies, fans, or cards); these types of handles are not designed to support the weight
of the unit.
Statement 1033—SELV-IEC 60950 DC Power Supply
Warning Connect the unit only to DC power source that complies with the Safety Extra-Low Voltage (SELV) requirements
in IEC 60950 based safety standards.
OL-32476-01 Rev. V4
Regulatory Compliance and Safety Information—Cisco ASR 920 Series Aggregation Services Routers
9