Statement 289-Power Supply Installation Warning; Statement 294-Class A Warning For Korea; Statement 328-Main Ground Connection Warning; Statement 342-Before Connecting To System Power Supply - Cisco NCS 500 Serie Manual Del Usuario

Regulatory Compliance and Safety Information—Cisco NCS 500 Series Routers
Statement 289—Power Supply Installation Warning
Power supply captive installation screws must be tight to ensure protective grounding continuity.
Warning
Statement 294—Class A Warning for Korea
Warning This is a Class A Device and is registered for EMC requirements for industrial use. The seller or buyer should be
aware of this. If this type was sold or purchased by mistake, it should be replaced with a residential-use type.
Statement 328—Main Ground Connection Warning
Warning For Nordic countries (Norway, Finland, Sweden and Denmark) this system must be installed in a Restricted Access
Location, where the voltage of the main ground connection of all equipment is the same (equipotential earth) and
the system is connected to a grounded electrical outlet.
Statement 342—Before Connecting to System Power Supply
High leakage current earth connection essential before connecting to system power supply.
Warning
Statement 371—Power Cable and AC Adapter
Warning When installing the product, please use the provided or designated connection cables/power cables/AC
adaptors/batteries. Using any other cables/adaptors could cause a malfunction or a fire. Electrical Appliance and
Material Safety Law prohibits the use of UL-certified cables (that have the "UL" or "CSA" shown on the cord), not
regulated with the subject law by showing "PSE" on the cord, for any other electrical devices than products
designated by CISCO.
All manuals and user guides at all-guides.com
Regulatory Compliance and Safety Information—Cisco NCS 500 Series Routers
5