Statement 12-Power Supply Disconnection Warning; Statement 43-Jewelry Removal Warning; Statement 94-Wrist Strap Warning; Statement 191-Vcci Class A Warning For Japan - Cisco NCS 500 Serie Manual Del Usuario

Statement 12—Power Supply Disconnection Warning
Before working on a chassis or working near power supplies, unplug the power cord on AC units; disconnect the
Warning
power at the circuit breaker on DC units.
Statement 43—Jewelry Removal Warning
Before working on equipment that is connected to power lines, remove jewelry (including rings, necklaces, and
Warning
watches). Metal objects will heat up when connected to power and ground and can cause serious burns or weld
the metal object to the terminals.
Statement 94—Wrist Strap Warning
During this procedure, wear grounding wrist straps to avoid ESD damage to the card. Do not directly touch the
Warning
backplane with your hand or any metal tool, or you could shock yourself.
Statement 191—VCCI Class A Warning for Japan
This is a Class A product based on the standard of the VCCI Council. If this equipment is used in a domestic
Warning
environment, radio interference may occur, in which case, the user may be required to take corrective actions.
Statement 263—Fan Warning
The fans might still be turning when you remove the fan assembly from the chassis. Keep fingers, screwdrivers,
Warning
and other objects away from the openings in the fan assembly's housing.
Regulatory Compliance and Safety Information—Cisco NCS 500 Series Routers
4
All manuals and user guides at all-guides.com
Regulatory Compliance and Safety Information—Cisco NCS 500 Series Routers