Operation - Black and Decker BDMS100 Manual De Instrucciones

OPERATIONAL CONTROLS AND ADJUSTMENTS
TABLE HAZARD AREA
The area inside the two red lines (A) Fig. 11
on the table is designated as a hazard zone. Never place
your hands inside this area while the machine is running.
STARTING AND STOPPING THE MITER SAW
To start the miter saw, depress the switch trigger (A) Fig. 12. To stop the miter saw, release the switch trigger.
This saw is equipped with an automatic electric blade brake. As soon as the switch trigger (A) Fig. 12, is released, the electric brake
is activated and stops the blade in seconds.
A turning saw blade can be dangerous. After completing cut, release switch trigger (A) Fig. 12, to activate
blade brake. Keep cuttinghead down until blade has come to a complete stop.
The torque developed during braking may loosen the arbor screw (E) Fig. 44. The arbor screw should be checked
periodically and tightened if necessary.
All manuals and user guides at all-guides.com

OPERATION

A
Fig. 12
11
Fig. 11
A