Assembly - Black and Decker BDMS100 Manual De Instrucciones

For your own safety, do not connect the machine to the power source until the machine is
completely assembled and you read and understand the entire instruction manual.
Thread the table lock handle (A) Fig. 4 into the threaded hole (B)
of the arm bracket.
ROTATING THE TABLE TO THE 90° DEGREE POSITION
1. Turn the table lock handle (A) Fig. 5 counter-clockwise one
or two turns, and depress the index lever (B) to release the
45° positive stop.
All manuals and user guides at all-guides.com
9
A
Fig. 4
B
Fig. 5
B
A