Troubleshooting - Omron MIT Elite Manual De Instrucciones

All manuals and user guides at all-guides.com
HEM-7300-WE_main.book 32 ページ ２０１１年１１月１０日 木曜日 午前１１時３９分
5.Handling Errors and Problems
5.2

Troubleshooting

Problem
The reading is
extremely low (or high).
Arm cuff pressure does
not rise.
Arm cuff deflates too
soon.
Cannot measure or
readings are too high.
The unit loses power
during measurement.
32
Cause
Apply the arm cuff
Arm cuff not applied
correctly.
correctly.
Refer to section 3.2.
Remain still and do not
talk during
Movement or talking
measurement.
during measurement.
Refer to section 3.3.
Remove any clothing
interfering with the arm
Clothing is interfering
cuff.
with the arm cuff.
Refer to section 3.1.
Make sure that the air
Is the air jack securely
jack is connected
inserted into the main
securely.
unit?
Refer to section 3.2.
Replace the arm cuff
Air is leaking from the
with a new one.
arm cuff.
Refer to chapter 7.
Apply the cuff correctly
so that it is firmly
wrapped around the
The arm cuff is loose.
arm.
Refer to section 3.2.
Is the cuff wrapped
Attach the arm cuff
correctly around the
correctly.
arm?
Check that the air plug
The cuff pressure does
is properly connected to
not rise although the
the unit. Push the air
pump motor can be
plug firmly into the air
heard.
jack.
Replace the batteries
The batteries are empty.
with new ones.
Remedy