dirna Bergstrom bycool COMPACT 1.4 Instrucciones De Montaje página 19

COMPACT 1.4
Position the interior air distribution panel on the
13
front studs with 1 M6 nut, 1 Ø6 wide-rimmed
washer and secure with L=25 hexagon and
tighten.
Note: The hexagon must be 1 mm above
the upholstery.
13
Rubber washer
EPDM
seal
Cabin roof
Upholstery
Tighten the nut in point 10 until it comes up
14
against the top part of the interior air distribution
panel.
Rubber washer
14
EPDM
seal
Cabin roof
Upholstery
Position the consoles and align the unit. Once
15
aligned, remove the console.
Compact Base
M6 Nut
M6 stud
1 mm
Compact Base
M6 stud
Hexágono
1 mm
Air conditioning for vehicles
Ø6 Flat
washer
Foam duct unit
Tighten the nut
(point 10)
Foam duct unit
15
19
EN
Foam
Interior air distribution
panel
Foam
Interior air distribution
panel